Canon imagePROGRAF iPF9400S User Manual page 564

Loading Sheets in the Printer
• If no print job was received
1.
Press the Load button.
2.
Press ▲ or ▼ to select Load Cut Sheet, and then press the OK button.
•
Note
2
Lift the Release Lever and open the Top Cover.
Important
564
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step.
• Do not touch the Linear Scale (a), Carriage Shaft (b), or
Fixed Blade (c). This may stain your hands and damage
the printer.
iPF9400S
User's Guide