Canon imagePROGRAF iPF9400S User Manual page 354

To start from Microsoft Excel (Windows)
Important
3
Check that the imagePROGRAF Print Plug-In toolbar/ribbon is
displayed.
4
Click the buttons on the toolbar/ribbon according to the items you want to set.
Menu
Printer list
Print Button
Important
354
•
If the imagePROGRAF Print Plug-In toolbar/ribbon is not displayed, refer to the following.
•
When Print Plug-In for Office is not displayed
Icon
Displays the About, Help, and Special Settings dialog boxes. (See "Configuring Special Set-
tings.")
Select Printer.
If you select Show All Printers, the imagePROGRAF printers will be displayed again. Select
this when you want to display all printer drivers or update the display.
The print Wizard is displayed.
The settings Print Entire Sheet and Print Selected Area can be set.
•
If you want to change the display to another file or application while the Printing Wizard is open, close the Printing
Wizard dialog box. Otherwise, you may not be able to change displays or operate the toolbar/ribbon.
•
The Printing Wizard will not start if you click the Print button on the toolbar/ribbon while editing a cell.
•
When more than one worksheet is selected, the Printing Wizard cannot be run. Select only one worksheet and
click Print again.
•
When an object is selected, the Printing Wizard is not started if you click the Print button on the toolbar/ribbon.
•
If the paper size in Excel is blank, the Printing Wizard cannot be run. From the File menu in Excel, select Page
Setup and check Paper size.
→P.326
→P.361
Printing Wizard dialog box
Contents
iPF9400S
User's Guide