Using The Output Stacker - Canon imagePROGRAF iPF9400S User Manual

Using the Output Stacker

(See "Using the Output Stacker.")

Using the Output Stacker

Using the Output Stacker
The Output Stacker can be held at four positions, as shown.
• When storing printed documents on the Output Stacker
Use position (1).
• When the Output Stacker is not used
Use position (2).
• When the Media Take-up Unit is used, or when the Output Stacker is stored for long periods
Lower it to position (3) for storage. (See "Storing the Output Stacker.")
When using the Output Stacker again after storage, reattach the Basket Rod on the front of the Output Stacker to
the tips of the left and right basket arms and pull it out completely .
• When printing on large, stiff sheets
Use position (3).
572
Set it to position (4) when printing banners or when printing on delicate paper. (See "Using the output stacker for
ejection in front.")
→P.572
→P.573
→P.576
iPF9400S
User's Guide