Canon imagePROGRAF iPF9400S User Manual page 549

iPF9400S
7
Holding the Roll Holder flange (a), remove the holder
from the Roll Holder Slot.
•
For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from Rolls."
Note
8
Lower the Ejection Guide and close the Top Cover.
•
To load new paper in the printer at this point, see "Loading Rolls in the Printer."
•
Note Clean inside the top cover before loading paper.
(See "Cleaning Inside the Top Cover.")
User's Guide
→P.869
Removing the Roll from the Printer
→P.550
→P.541
549