Page Setup Dialog Box - Canon imagePROGRAF iPF9400S User Manual

iPF9400S
• Auto Arrange Spacing
Change the object-to-object spacing to be applied in the operation of laying out objects automatically.
•
You can input between 0.0 and 100.0(mm) (between 0.00 and 3.94(inch)).
•
You can change the numbers by clicking either ▲ button or ▼ button.
Note

Page Setup Dialog Box

Page Setup Dialog Box

This dialog box appears when you select Page Setup from the File menu.This dialog box provides selections for set-
ting the media size, orientation and other important features.
• Paper Orientation
This selects the paper orientation.
The following settings are available for orientation.
Setting
Vertical
Horizontal
• Roll Paper Length
Set the length of one page to print on roll paper.
When you place a checkmark on Auto Settings, the one-page length to be printed on roll paper is automatically
set so that the laid-out objects are printed on one page.
•
Available only if rolls are selected in Paper Source.
•
You can input between 203.2 and 18000.0(mm) (between 8.00 and 708.66(inch)).
Note
•
You can change the numbers by clicking either ▲ button or ▼ button.
• Order
Set the object layout order.
The following settings are available for order.
Setting
Upper Left to Right
Upper Left to Bottom
User's Guide
Prints the image and text created with the application software in the orientation as it is.
Prints the image and text by rotating sideways 90 degrees from the orientation as specified in the
application.
The objects are laid out from upper left to right.
The objects are laid out from upper left to bottom.
Page Setup Dialog Box (Mac OS X)
Details
Details
439