Canon imagePROGRAF iPF9400S User Manual page 271

iPF9400S
•
When Paper Size is smaller than Output Image Size, part of the image may not print.
Note
• Paper Size
You can select the size of the print media.
•
This is not displayed when a checkmark is placed in Borderless Printing.
•
Note
This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
• Orientation
This selects the print orientation.
The following settings are available for orientation.
Setting
Portrait
Landscape
• Layout
You can select the print position of an image on the media.
The following settings are available for layout.
Layout
Setting
Upper-Left of Output Paper Size
Center of Output Paper Size
Specify Print Start Position
•
Select Print Area Layout or Image in Preview when you select Layout.
Note
Roll Paper Layout
Setting
Upper-Left of Roll Paper
Center of Roll Paper
•
Select Roll Paper Preview in Preview when you select Roll Paper Layout.
Note
• Paper Source
You can select the media source.
The following settings are available for media source.
Setting
Roll Paper
User's Guide
Prints the image on the media as it appears on the screen.
Prints the image on the media rotated 90 degrees.
Prints the image with fitting the top left of the active print area for Paper Size.
Prints the center of the image on the center of the selected Paper Size.
You can print with specifying the top and left printing start positions in From Top Margin and
From Left Margin for Paper Size.
From Top Margin Input the margin from the top of the media in numbers.
*You can input between -9999 and 9999 mm.
From Left Margin Input the margin from the left of the media in numbers.
*You can input between -9999 and 9999 mm.
Prints the top left of Media Size on the top left of the selected roll paper.
Prints the center of Media Size on the center of the selected roll paper.
Select to print on roll paper.
Details
Details
Details
Details
Page Setup Sheet
271