Printing On Non-Standard Paper Sizes (Mac Os X) - Canon imagePROGRAF iPF9400S User Manual

Hide thumbs Also See for imagePROGRAF iPF9400S:
Table of Contents

Advertisement

Printing on Non-Standard Paper Sizes (Mac OS X)

7
Click the Page Setup tab to display the Page Setup
sheet.
8
O
Click
Size Options to display the Paper Size Options dialog box.
9
Enter a desired paper name in Custom Paper Size Name. 430 mm Square is used in this example.
10
Select mm in Units.
11
Enter 430 (16.9 in) in both Width and Height.
Note
12
Click Add to register 430 mm Square.
13
Click OK to close the Paper Size Options dialog box.
14
Click Cut Sheet in the
15
A
In the
Page Size list, click the size you added,430 mm Square.
16
Confirm the print settings and print as desired.
Note

Printing on Non-Standard Paper Sizes (Mac OS X)

Printing on Non-Standard Paper Sizes (Mac OS X)
For printing on non-standard size paper, first register the paper size in the printer driver.
Call a non-standard paper size registered in the printer driver with Custom Page Sizes (Mac OS X v10.5)/ Custom
Paper Sizes (Mac OS X v10.6 or later).
Once you register Custom Page Sizes / Custom Paper Sizes, you then can select it repeatedly from the paper size
list.
124
Custom Page Sizes / Custom Paper Sizes can be set up to 18.0 m.
This topic describes how to register a non-standard paper size by the name of 430*430and print based on the following
example.
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either Width or Height,
the other value will be automatically applied based on the original aspect ratio.
L
Paper Source list.
For tips on confirming print settings, see " Confirming Print Settings
"
→P.182
iPF9400S
User's Guide

Advertisement

Table of Contents
loading

Table of Contents