Deleting Saved Jobs - Canon imagePROGRAF iPF9400S User Manual

Deleting Saved Jobs

3
In the Resume Printing dialog box, enter the quantity
to print and click OK.
For details, refer to the imagePROGRAF Printmonitor help file.
Deleting Saved Jobs
Deleting Saved Jobs
Delete saved print jobs stored on the printer's hard disk as follows.
This operation is available from the Control Panel, in RemoteUI, imagePROGRAF Status Monitor, and imagePROG-
RAF Printmonitor.
Using the Control Panel
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Job tab (
•
Note
2
Press the OK button.
The Job Menu is displayed.
3
Press ▲ or ▼ to select Stored Job, and then press the OK button.
4
Press ▲ or ▼ to select the box number (in the range 00–29), and then press the OK button.
•
Note
5
Press ▲ or ▼ to select Job List, and then press the OK button.
6
Press ▲ or ▼ to select the saved job, and then press the OK button.
7
Press ▲ or ▼ to select Delete, and then press the OK button.
776
8
Press ▲ or ▼ to select "Yes", and then press the OK button.
).
If the Tab Selection screen is not displayed, press the Menu button.
Enter a password if one has been set, and then press the OK button.
iPF9400S
User's Guide