Replace Member Errors - Dell PowerEdge RAID H700 User Manual

Replace Member Errors

Table 9-6 describes issues related to the Replace Member feature.
NOTE:
For more information about the Replace Member features, see "Using
Replace Member and Revertible Hot Spares" on page 35.
Table 9-6. Replace Member Operation Errors
Issue
The source disk fails
during the Replace
Member operation.
Target disk fails
Other disks fail
Corrective Action
If the source data is available from other disks in the virtual
disk, the rebuild begins automatically on the target disk, using
the data from the other disks.
If the target disk fails, the Replace Member operation aborts.
If the target disk fails and the Replace Member operation
aborts but the source data is still available, then the Replace
Member operation continues as Replace Member.
Troubleshooting
147