Dell PowerEdge RAID H700 User Manual page 124

Change Key
NOTE:
Change Key is active if there is a security key present on the controller.
Perform the following steps when changing the security key on the controller:
1 During host system bootup, press <Ctrl><R> when the BIOS screen is
displayed.
The Virtual Disk Management screen is displayed.
If there is more than one controller, the main menu screen is displayed.
2 Select a controller, and press <Enter>.
The Virtual Disk Management screen is displayed for the selected
controller.
3 Use the arrow keys to highlight Security Key Management.
4 Press <F2> to display the actions you can perform.
5 Select Change Key and press <Enter>.
6 The Change Security Key screen is displayed. The cursor is at the Security
Key Identifier. Enter an identifier for your Security Key.
7 Press <Tab> to enter a new passphrase.
NOTE:
security key on the controller.
8 Press <Tab> and select OK to accept the settings and to exit the window.
Select Cancel to exit if you do not want to change the security key on the
controller.
NOTE:
with the new security key. If you had previously removed any secured disks,
you still need to supply the old passphrase to import them.
124
Security Key and RAID Management
You must provide the current passphrase in order to change the
If there is an existing configuration on the controller, it is updated