•
Patrol Read adjusts the amount of controller resources dedicated to
Patrol Read operations based on outstanding disk I/O. For example,
if the system is busy processing I/O operation, then Patrol Read uses
fewer resources to allow the I/O to take a higher priority.
•
Patrol Read does not run on any disks involved in any of the
following operations:
–
Rebuild
–
Replace Member
–
Full or Background Initialization
–
CC
–
RLM or OCE
NOTE:
By default, Patrol Read automatically runs every seven days on configured
SAS and SATA hard drives. Patrol Read is not necessary on SSD and is disabled by
default.
Storage Controller Features
39