SMART Errors
SMART monitors the internal performance of all motors, heads, and physical disk electronics and detects
predictable physical disk failures.
NOTE: For information about where to find reports of SMART errors that could indicate hardware
failure, see the Dell OpenManage storage management documentation at dell.com/support/
manuals.
Smart Error Detected On A Physical Disk In A Redundant Virtual Disk
Issue:
A SMART error is detected on a physical disk in a redundant virtual disk.
Corrective
Perform the following steps:
Action:
1.
2.
3.
4.
Smart Error Detected On A Physical Disk In A Non-Redundant Virtual Disk
Issue:
A SMART error is detected on a physical disk in a redundant virtual disk.
Corrective
Perform the following steps:
Action:
1.
2.
3.
4.
Replace Member Errors
NOTE: For more information about the Replace Member features, see the topic
Member And Revertible Hot
Back up your data.
Force the physical disk offline.
NOTE: If a hot spare is present, the rebuild starts with the hot spare after
the disk is forced offline.
Replace the disk with a new physical disk of equal or higher capacity.
Perform the Replace Member operation.
NOTE: The Replace Member operation allows you to copy data from a
source physical disk of a virtual disk to a target physical disk that is not a
part of the virtual disk. For more information about the Replace Member
feature, see the topic
Back up your data.
Use Replace Member or set up a global hot spare to replace the disk
automatically.
NOTE: For more information about the Replace Member feature, see the
topic
Using Replace Member And Revertible Hot
Replace the affected physical disk with a new physical disk of equal or higher
capacity.
Restore from the backup.
Spares.
Using Replace Member And Revertible Hot
Spares.
Spares.
Using Replace
81