Dell PowerEdge RAID H700 User Manual page 135

Poweredge raid controller (perc)
Hide thumbs Also See for PowerEdge RAID H700:
Table of Contents

Advertisement

Table 9-1. BIOS Errors and Warnings
Error Message
BIOS Disabled. No
Logical Drives Handled
by BIOS
Adapter at Baseport
xxxx is not responding
where xxxx is the baseport of
the controller
(continued)
Probable Cause
This warning message is
displayed after you disable
the ROM option in the
configuration utility.
When the ROM option is
disabled, the BIOS cannot
boot to INT 13h and
cannot provide the ability
to boot from the virtual
disk.
Int 13h is an interrupt
signal that supports
numerous commands that
are sent to the BIOS, then
passed to the physical disk.
The commands include
actions you can perform
with a physical disk, such
as reading, writing, and
formatting.
Corrective Action
Enable the ROM
option.
Contact Dell Technical
Support.
Troubleshooting
135

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge raid h800Perc h700Perc h800

Table of Contents