Creating Secured Virtual Disks - Dell PowerEdge RAID H700 User Manual

Delete Key
NOTE:
Delete Key is active if there is a security key present on the controller.
NOTE:
Delete Key can only be performed when there are no secured virtual disks
present.
NOTE:
After the Delete Key operation, all unconfigured, secured SEDs shall be
secure-erased.
Perform the following steps when deleting the security key on the controller:
1 During host system bootup, press <Ctrl><R> when the BIOS screen is
displayed.
The Virtual Disk Management screen is displayed. If there is more than
one controller, the main menu screen is displayed.
2 Select a controller, and press <Enter>.
The Virtual Disk Management screen is displayed for the selected
controller.
3 Use the arrow keys to highlight Security Key Management.
4 Press <F2> to display the actions you can perform.
5 Select the Delete key and press <Enter>.

Creating Secured Virtual Disks

To create a secured virtual disk, the controller must have a security key
established first. See "Create Key" on page 122.
NOTE:
Combining SAS and SATA hard drives within a virtual disk is not supported.
Also, combining hard drives and solid state drives (SSDs) within a virtual disk is not
supported.
After the security key is established, perform the steps outlined in the
"Creating Virtual Disks" on page 88 to create a virtual disk.
To secure the virtual disk, navigate to the Secure VD option at the bottom
left area of the Create New VD screen.
NOTE:
All virtual disks added to a secured Disk Group are secured.
Security Key and RAID Management
125