Replacing The Drives In To The Hard-Drive Cage; Procedure; Procedure To Replace Bottom Drive; Post-Requisites - Dell Embedded Box PC 5000 Service Manual

Replacing the drives in to the
hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Hard drives/solid-state drives are fragile. Exercise care
when handling the Solid-state/hard drive.

Procedure

NOTE: If the Embedded Box PC is shipped with two drives, the bottom
drive has to be replaced first. For more information see,
replace bottom
1 Insert the drive into the hard-drive cage.
2 Align the screw holes on the drive with the screw holes on the hard-drive
cage.
3 Replace the screws that secure the hard drive to the hard-drive cage.

Procedure to replace bottom drive

1 Insert the bottom drive into the bottom slot on the hard-drive cage and
push it down into place.
2 Align the screw holes on the bottom drive with the screw holes on the
hard-drive cage.
3 Replace the screws that secure the bottom drive to the hard-drive cage.

Post-requisites

Follow step 2 to step 8 in
28
Before working inside your Embedded Box
drive.
"Replacing the back
PC. For more safety best practices,
www.dell.com/
cover".
PC.
After
Procedure to