Standard Features (Server Blade) - HP Integrity BL860c Quickspecs

QuickSpecs

Standard Features (Server Blade)

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
specifications, please visit:
Processor
Upgradeability
Cache Memory
Chipset
Memory
Network Adapter
Expansion Slots
Integrated
Manageability
Storage Controller
Maximum Internal
Storage
http://h71028.www7.hp.com/ERC/downloads/4AA1-0071ENW.pdf
Intel® Itanium® Single-Core Processors Model 9110N (1.6 GHz, 12MB L3 cache, FSB533)
Intel® Itanium® Dual-Core Processors Model 9140M (1.66 GHz, 18MB L3 cache, FSB667)
Intel® Itanium® Dual-Core Processors Model 9120N (1.42 GHz, 12MB L3 cache, FSB533)
Upgradeable to two (2) processors
NOTE: The HP Integrity BL860c only supports 1 or 2 processor configurations. Processors must
be identical
1.2 MB per Core Level 2 cache memory
HP zx2
Type
Minimum
Maximum
NOTE: Memory modules are DIMM pairs.
NOTE: Double Chip Spare is enabled in a single memory module. Double Chip Spare requires
identical DIMM types and capacities
Four (4) embedded NIC ports, plus one (1) additional management NIC port:
Four (4) NIC ports via (2) Broadcom 5704 Dual Port Gigabit NIC
One (1) additional 10/100 NIC dedicated to Integrity iLO 2 Management
Up to twelve additional Gigabit Ethernet ports via the NC364m Quad-port mezzanine adapter
Three Mezzanine slots (two (2) Type II PCIe, one (1) Type I PCIe x4)
Integrity Integrated Lights-Out 2 (iLO 2) Advanced Pack (Factory integrated)
HP BladeSystem c-Class Onboard Administrator
HP BladeSystem c-Class Virtual Connect
LSI 1068 SAS Controller 2 SAS Channels (one to each HDD)
Hot Plug SAS
DA - 12671 U.S. QuickSpecs — Version 18 — 2/18/2009
PC2-4200 DDR2 DIMMs (DDR2-533)
2 GB (2 x 1 GB)
48 GB (12 x 4 GB)
Supports RAID 1
600GB SAS
HP Integrity BL860c Server Blade
2 x 300GB SAS
Page 4