Rear View - Lenovo ThinkServer TS100 User Manual

Rear view

The following illustration shows the connectors and LEDs on the rear of the server.
Power-cord connector
AC power LED
DC power LED
Serial 2 connector
Parallel connector
Serial 1 connector
10
ThinkServer TS100 Types 6431, 6432, 6433, and 6434: User Guide
1
Ethernet transmit/receive activity
LED (amber)
2
Ethernet link status LED (green)
3
Remote Supervisor Adapter II
SlimLine (Ethernet) connector
4
USB connectors 1 and 2
5
Ethernet connector
6
USB connectors 3 and 4
7
Video connector
Connect the power cord to this connector.
On some server models, each hot-swap power supply has an ac power
LED and a dc power LED. During typical operation, both the ac and dc
power LEDs are lit.
On some server models, each hot-swap power supply has a dc power LED
and an ac power LED. During typical operation, both the ac and dc power
LEDs are lit.
Connect a 9-pin serial device to this connector.
Connect a parallel device to this connector.
Connect a 9-pin serial device to this connector.
8
Serial 1 (Com1) connector
9
Parallel connector
10
Serial 2 (Com2) connector
11
DC power LED
12
AC power LED
13
Power cord connector