Removing The Side Cover - Lenovo ThinkServer TS100 User Manual

Removing the side cover

To remove the server side cover, complete the following steps:
1. Review the safety information that begins on page v and "Installation
2. Turn off the server and all attached devices (see "Server power features" on
3. Lay the server on its side.
4. Unlock the side cover; then, press the cover-release latch down, as indicated by
5. Lift the side cover off the server and set it aside.
To replace the side cover, see "Reinstalling the side cover" on page 53.
Attention: For proper cooling and airflow, replace the cover before you turn on
the server. Operating the server for extended periods of time (more than 30
minutes) with the cover removed might damage server components.
guidelines" on page 19.
page 11); then, disconnect all power cords and external cables.
the two arrows on the latch.
1 Cover-release latch
2 Key lock
Chapter 2. Installing optional devices
23