Lenovo ThinkServer TS100 User Manual page 20

Types 6431, 6432, 6433, and 6434
Hide thumbs Also See for ThinkServer TS100:
Table of Contents

Advertisement

v Automatic server restart after a power failure, based on the BIOS setting
v Availability of microcode level
v Boot-block recovery
v Built in, menu-driven setup, system configuration, and redundant array of
v Built-in monitoring for fan, power, temperature, and voltage
v CD-based diagnostic programs
v Cooling fans with speed-sensing capability
v Customer support center that is available 24 hours a day, 7 days a week
v Diagnostic support of ServeRAID adapters
v Error codes and messages
v Error correcting code (ECC) double-data-rate 2 (DDR2) synchronous dynamic
v Error logging of POST failures
v Hot-swap Serial Attached SCSI (SAS) hard disk drives (some models)
v Hot-swap Serial Advanced Technology Attachment (SATA) hard disk drives
v Integrated Ethernet controller
v Intelligent Platform Management Interface (IPMI)
v Support for an optional IBM Remote Supervisor Adapter II SlimLine
v Key-lock support for physical security
v Memory change messages posted to the error log
v Mini-baseboard management controller (mini-BMC) service processor
v Power management
v Power-on self-test (POST)
v Read-only memory (ROM) checksums
v Redundant Ethernet capabilities (requires an optional Ethernet adapter) with
v Simple-swap Serial Advanced Technology Attachment (SATA) hard disk drives
v Standby voltage for system-management features and monitoring
v System auto-configuring from the configuration menu
v System-error LED on the front bezel and diagnostic LEDs on the system board
v Upgradeable mini-BMC firmware
v Upgradeable microcode for POST, basic input/output system (BIOS) code, and
v Vital product data (VPD); includes serial-number information and replacement
v Wake on LAN
2. Service availability varies by country or region. Response time varies; may exclude holidays.
6
ThinkServer TS100 Types 6431, 6432, 6433, and 6434: User Guide
independent disks (RAID) configuration
random-access memory (SDRAM) with serial presence detect (SPD)
(some models)
failover support
(some models)
read-only memory (ROM) resident code, locally or over a LAN
part numbers, stored in nonvolatile memory, for easier remote maintenance
®
capability
2

Advertisement

Table of Contents
loading

Table of Contents