Connecting External Devices; Installing The Server In A Rack - Lenovo ThinkServer TS100 User Manual

If the server has a ServeRAID adapter and you have installed or removed a hard
disk drive, see the ServeRAID documentation that comes with the server for
information about reconfiguring the disk arrays.

Connecting external devices

If you install an optional adapter that the server supports, you can attach external
devices to the server.
To attach an external device, complete the following steps:
1. Read the safety information that begins on page v, "Installation guidelines" on
2. Turn off the server and all attached devices.
3. Follow the instructions that come with the device to prepare it for installation
Note: If you are attaching an external device, see the documentation that comes
with the device for information about cabling.

Installing the server in a rack

An optional Tower-to-Rack Kit is needed to convert the server from a tower model
to a rack model. You can then install the server in a rack cabinet. To order a
Tower-to-Rack Kit for the server, contact your Lenovo marketing representative or
authorized reseller.
Note: The Tower-to-Rack Kit does not support the server models that have eight
2.5-inch SAS hot-swap drive bays. You cannot install these models in a rack
cabinet.
page 19, and the documentation that comes with the device.
and to connect it to the server.
Chapter 2. Installing optional devices
55