System board LEDs
The following illustration shows the light-emitting diodes (LEDs) on the system
board.
For more information about the system board LEDs, see the Hardware Maintenance
Manual on the ThinkServer Documentation DVD.
Installation guidelines
Important: Before you install optional hardware devices, make sure that the server
is working correctly. Start the server, and make sure that the operating system
starts, if an operating system is installed, or that a 19990305 error code is
displayed, indicating that an operating system was not found but the server is
otherwise working correctly. If the server is not working correctly, see "Solving
Problems" in the Installation Guide for diagnostic information.
1
Standby power LED
2
Board VRD fault LED
3
Microprocessor fan LED
4
DIMM LED
5
Hard drive fan LED
6
Mini-PCI slot LED
7
Microprocessor LED
8
Mini-BMC heartbeat LED
9
PCI 32-bit 33 MHz LED
10
PCI-X 64-bit 133 MHz LED
11
PCI Express x4 LED
12
PCI Express x8 LED
13
System fan LED
Chapter 2. Installing optional devices
19