Cabling The Remote Supervisor Adapter Ii Slimline; Installing The Remote Supervisor Adapter Ii Slimline Firmware - Lenovo ThinkServer TS100 User Manual

The Web browser must be Java-enabled and must support JavaScript

Cabling the Remote Supervisor Adapter II SlimLine

You can manage the server remotely through the Remote Supervisor Adapter II
SlimLine by using one of the user interfaces and one of the connection methods
that are described in the following table.
Table 13. Cabling tasks to enable remote access to the Remote Supervisor Adapter II
SlimLine
User interface to Remote Supervisor
Adapter II SlimLine
ASM Web-based interface using HTTP
Text-based interface using Telnet
To connect the Ethernet cables, complete the following steps:
1. Connect one end of a Category 3 or Category 5 Ethernet cable to the Ethernet
connector on the Remote Supervisor Adapter II SlimLine. Connect the other
end of the cable to the network.
2. To make sure that the network connection is working, check the Ethernet LEDs.
The following illustration shows the locations of the LEDs.
1
Ethernet transmit/ receive activity
LED (amber)
2
Ethernet link status LED (green)
3
Remote Supervisor Adapter II
SlimLine (Ethernet)

Installing the Remote Supervisor Adapter II SlimLine firmware

The software and firmware files that you need are contained in one system service
package installation kit. The kit contains the following files:
Connection to Remote Supervisor Adapter
II SlimLine
LAN using the Ethernet connector
Chapter 3. Configuring the server
™
.
73