Using The Mini-Baseboard Management Controller Utility Programs; Using The Mini-Baseboard Management Controller Setup Utility Program - Lenovo ThinkServer TS100 User Manual

2. Enter your product number (machine type and model number) or select
3. Select Servers from the Brand list.
4. From Family list, select ThinkServer TS100
5. Select the operating system that you want from the Operating system list, and
6. Click Operating system installation to download instructions to install the

Using the mini-baseboard management controller utility programs

Use the mini-baseboard management controller utility programs to configure the
mini-baseboard management controller, download firmware updates and
SDR/FRU updates, and remotely manage a network.
Using the mini-baseboard management controller setup utility
program
Use the mini-baseboard management controller setup utility program to view or
change mini-baseboard management controller information, user management,
LAN configuration, and LAN alert settings. To download the program, complete
the following steps.
Note: Changes are made periodically to the Lenovo Web site. The actual procedure
might vary slightly from what is described in this document.
1. Go to: http://www.lenovo.com/support.
2. Enter your product number (machine type and model number) or select
3. Select Servers from the Brand list.
4. From Family list, select ThinkServer TS100, and click Continue.
5. Click Downloads and drivers to download firmware updates.
6. From the BMC software, copy the files bmc.exe and Init.ini to a setup utility
To start the mini-baseboard management controller setup utility program, complete
the following steps:
1. Turn on the server.
2. Insert the setup utility diskette into the diskette drive.
3. From a command line, type bmc and press Enter.
For the program to interface with the mini-baseboard management controller, the
parameters in the Intf.ini file must be set correctly. To modify the Intf.ini file, select
0 from the main menu and use the arrow keys to select settings for the following
parameters:
v System interface: This is the interface through which system software sends and
v Port Address: This is the base address of the system interface.
v Register Spacing: Select ByteBoundary, ThirtyTwoBitBoundary, or
v Channel Number: Use the arrow keys to select the channel number (0 through
66
ThinkServer TS100 Types 6431, 6432, 6433, and 6434: User Guide
Servers from the Select your product list.
click Continue.
operating system.
Servers from the Select your product list.
diskette.
receives messages to and from the mini-baseboard management controller. Select
KCS (keyboard controller style).
SixteenBitBoundary.
15).