Transfer; Making A Blind Transfer [All] - Vertical Wave Phone User Manual

Transfer

Transfer
Transfer places a call on hold while you dial the destination extension number. Your System
Administrator configures the Transfer keys as blind or supervised transfer keys.

Making a Blind Transfer [ALL]

A blind transfer allows you complete a transfer without announcing the party to the destination
extension.
SIP PHONES
To Make a Blind Transfer
While on a call:
1.
2.
3.
4.
DIGITAL PHONES
To Make a Blind Transfer
While on a call:
1.
2.
3.
Release 1.5 SP2
Press Transfer ( ) to place the active call on hold.
On some models, there is an
Listen for the dial tone.
Enter the destination extension number.
Press Transfer ( ) again or hang up.
The party is transferred to the destination extension.
For 480i/CT, 9480i/CT, 9133i, 9143i
Hint:
use the L2 button to make this transfer. See the Hint under Supervised Transfer for
details.
Press TRNS/CONF to place the caller on hold.
Listen for the dial tone, then enter the destination extension number.
Hang up to complete the transfer.
The party is transferred to the destination extension.
XFER
softkey.
and all Aastra Series 5 models:
Wave Phone User Guide
Using Wave Phone Features
you can also
June 2009
-
3 58