Vol Reset Override; Setting The Ring Volume And Tone - Vertical Wave Phone User Manual

Phone Settings

Vol Reset Override

If your phone has a programmed Vol Reset Override button, you can use it to override the
volume reset feature. For example, if you are on a call, and you increase the volume. when you
hang up the phone the phone will reset the volume on the handset and headset to a safe level.
However, if you press the Vol Reset Override button, you can prevent the volume from returning
to the default volume level. This means that when your phone is off-hook, the handset and
headset levels will remain at the previous level.

Setting the Ring Volume and Tone

To Adjust the Ring Volume
On an idle phone:
To Set the Ring Tone
On an idle phone:
1.
2.
3.
4.
5.
Release 1.5 SP2
Press VOLUME (up or down) keys to adjust the ring volume as needed.
You will hear a short ring that allows you to hear the current ring volume. The volume
level will also appear on the display.
MENU
Press the softkey on the display.
NEXT RING
Press until appears.
Press the sofkey under
Press the VOLUME (up or down) keys to adjust the ring tone as needed.
You will hear a short ring for each tone so that you can decide which one you
want to use.
OR
On an Edge 700 phone:
Use the softkeys to change the ring tone as needed.
You will hear a short ring for each tone so that you can decide which one you
want to use.
DONE
Press or SPEAKER to save the setting.
RING
.
Wave Phone User Guide
About Wave Digital Phones
June 2009
-
6 28