Conference Calls; Setting Up A Conference Call [All] - Vertical Wave Phone User Manual

Conference Calls

Conference Calls
You can set up a conference call that includes both internal and external parties. If you have a
Conference (
Hint:
single conference call.

Setting Up a Conference Call [ALL]

SIP PHONES
To Set Up a Conference Call Using the Conference (
With a party on the line:
1.
2.
3.
When all parties have been connected:
4.
To Make a Conference Call with Feature Codes
During a call:
1.
2.
Release 1.5 SP2
) button or a Flash button, you can set up a conference call.
Contact your System Administrator for the maximum number of parties allowed on a
Press Conference (
On some models, there is a
Listen for the dial tone, then dial the number of the next party.
When that party answers, press Conference (
• If a party is not available, press End Call to reconnect to the first party.
• For 480i/CT, 9480i/CT, and all Aastra Series 5 models: press Goodbye (
reconnect to the first party.
Repeat steps above for each party you want to include in the conference (up to
the allowed maximum).
Press Conference (
begin the conference call between all current parties.
Press Flash to place the other party on hold.
Listen for the dial tone, then dial the extension of the third party.
) to place the other party on hold.
CONF
softkey.
) one more time to complete the set up process and
Wave Phone User Guide
Using Wave Phone Features
) Button
) again to connect the calls.
-
3 24
to
June 2009