Direct Station Select/Busy Lamp Field; Using The Dss/Blf Feature [D] - Vertical Wave Phone User Manual

Direct Station Select/Busy Lamp Field

Direct Station Select/Busy Lamp Field
Direct Station Select/Busy Lamp Field (DSS/BLF) keys allow you to monitor the status of
extensions, to call extensions with one button press, and to easily transfer calls to them.
DSS/BLF keys are configured by the System Administrator or by user programming and can be
configured for blind or supervised transfer.
A solid red LED next to a DSS/BLF button indicates that the line is in use. A flickering red LED
indicates the extension is ringing. A blinking LED indicates that the extension has a call on hold.

Using the DSS/BLF Feature [D]

DSS/BLF buttons allow you to perform certain functions with only one press of a button (such
as calling an extension or transferring a call, etc.). Features available on these buttons depend
upon how they are programmed for your phone. Contact your System Administrator for details.
DIGITAL PHONES
Calling an Extension
Using Supervised Transfer
A supervised transfer allows you to announce a call before completing the transfer.
To Make a Supervised Transfer
While connected to another party:
1.
2.
3.
To Cancel a Supervised Transfer
Using Blind Transfer
A blind transfer allows you to transfer a call to another extension with one button press and
without announcing the transfer.
To Make a Blind Transfer
While connected to another party:
Release 1.5 SP2
Press the DSS/BLF button to call the programmed destination extension.
Press the DSS/BLF button for the destination extension.
When the destination party answers, announce the call.
Hang up or press SPEAKER to complete the transfer.
Press TAP to cancel the transfer before completion.
Press the DSS/BLF button.
Wave Phone User Guide
Using Wave Phone Features
June 2009
-
3 28