Password Protection; Using Password Protection [D]; Privacy; Using The Privacy Feature [D] - Vertical Wave Phone User Manual

Password Protection

Password Protection
You can configure your phone so that it requires a password before allowing user
programming such as editing the Autodial keys, programming feature keys, and changing
the voicemail display. Contact your Wave System Administrator for information about
password protection settings.

Using Password Protection [D]

DIGITAL PHONES
To Activate/Deactivate Password Protection
From an idle phone:
1.
2.
3.
4.

Privacy

The privacy feature is used to mark a call as private which means that shared line appearances
will be prevented from breaking into the call.
Additionally, a held private call can not be retrieved by a shared line appearance. Privacy is
generated from any privacy enabled party to all parties in a call.
Transferring or parking a private call removes privacy from the call.

Using the Privacy Feature [D]

DIGITAL PHONES
To Make a Call Private
While ringback is heard or during a call:
To Turn off Privacy
Release 1.5 SP2
MENU
Press the softkey on the display.
NEXT PPROT
Press until
Enter the appropriate password, then press # or
On
Select to require a password before allowing user programming.
OR
Off
Select if you don't want a password required.
Press the pre-programmed Privacy button.
If your phone doesn't have a programmed Privacy button, press Flash, then *21.
If a call is in privacy, all parties in the call will have the LED on any configured Privacy
button illuminated red.
Press the illuminated Privacy button.
If your phone doesn't have a Privacy button, press Flash, then *21.
appears, then press the corresponding button.
Wave Phone User Guide
Using Wave Phone Features
Done
.
-
3 50
June 2009