Transfer; Transfer Transfer - Vertical Edge 120 User Manual

Operation – SDN
After you place an outside line call, press FEATURE
1.
2. The dialed number is stored in the Saved Number memory.
Operation – SNR
When the telephone is idle, press FEATURE
1.
2. The stored number is dialed.

Transfer

Transfer is used to deliver calls from your extension to another
extension.
Operation – Unsupervised
1. While connected to a call (outside line or intercom extension):
1.1. Press TRANSFER.
1.2. Dial the destination directory number where this call is to be
transferred (extension, UCD Group, Virtual Number, etc.)
OR...
1. If your phone has buttons that have been programmed to dial
specific extensions, press the appropriate button.
2. Hang up to complete the transfer.
Operation –Supervised
1. While connected to a call (outside line or intercom extension):
1.1. Press the TRANSFER button.
1.2. Dial the extension destination directory number where this
call is to be transferred.
OR...
1. If your phone has buttons that have been programmed to dial
specific extensions, press the appropriate button.
2. Wait for the called extension to answer the intercom call.
Announce the transfer.
3. Hang up to complete the transfer.
Page 40 Edge 120 Digital Executive Telephone User Guide
.
.
TRANSFER