Hold; Placing A Call On Hold [All] - Vertical Wave Phone User Manual

Hold

Hold
You can place a call on hold to keep the other party connected while you hang up the handset
or use other phone features.

Placing a Call on Hold [ALL]

SIP PHONES
To Place a Call on Hold
To Reconnect to a Call On Hold
Using the Reconnect Softkey (Models 480i/CT and 9480i/CT only)
DIGITAL PHONES
To Place a Call on Hold
Release 1.5 SP2
Press Hold ( ) on models 9112i, 9133i, and 9143i or the button labeled Hold
on 480i/CT, 9480i/CT, and all Aastra Series 5 models.
The LED flashes next to the line button with a call on hold.
You can hang up the handset or use other phone features.
If you leave the call on hold for too long, your phone rings back to
remind you.
The Flash button can be used to place calls on temporary hold.
Note:
Press the button corresponding to the line at which the call was placed on hold.
RECONNECT
Use the softkey to reconnect to a call that is on hold or parked.
Press HOLD.
When a call is on hold, the red LED flashes next to the corresponding line or call
appearance button.
You can hang up the handset or use other phone features.
If you leave the call on hold for longer than the system hold time (three minutes is the
default), your phone rings back and
The Flash button can be used to place calls on temporary hold. However, you
Note:
cannot hang up the handset or you will be reconnected to the call on hold.
HELD
is displayed.
Wave Phone User Guide
Using Wave Phone Features
June 2009
-
3 40