Network Menu; Tcp/Ip Settings - Canon LBP3360 User Manual

NETWORK MENU

■ TCP/IP SETTINGS

IP MODE...............................MANUAL*, AUTO
PROTOCOL*
DHCP..................................OFF*, ON
BOOTP ...............................OFF*, ON
RARP..................................OFF*, ON
IP SETTINGS
IP ADDRESS ......................0.0.0.0*
SUBNET MASK ..................0.0.0.0*
GATEWAY ADDRESS ........0.0.0.0*
DNS
PRIMARY ADD. ..................0.0.0.0*
SECONDARY ADD. ............0.0.0.0*
WINS ....................................OFF*, ON
ARP/PING.............................ON*, OFF
FTP
FTP PRINT .........................ON*, OFF
FTP SETTINGS ..................ON*, OFF
LPD PRINT ...........................ON*, OFF
RAW PRINT..........................ON*, OFF
IPP PRINT ............................ON*, OFF
HTTP ....................................ON*, OFF
RESPONSE..........................ON*, OFF
IP ADD.RANGE
REJECT RX/PRT................OFF*, ON
REJECT ADD.SET.*
PERMIT RX/PRT ................OFF*, ON
PERMIT ADD.SET.*
REJ SET/BROWSE ............OFF*, ON
REJECT ADD.SET.*
PMT SET/BROWSE ...........OFF*, ON
PERMIT ADD.SET.*
MAC ADDRESS SET
PERMIT RECEIVE .............OFF*, ON
PERMIT ADD.SET.*
*1 PROTOCOL is displayed only when IP MODE is set to AUTO.
*2 REJECT ADD.SET. and PERMIT ADD.SET. are displayed only when REJECT RX/PRT, PERMIT RX/
PRT, REJ SET/BROWSE, PMT SET/BROWSE, or PERMIT RECEIVE is set to ON.
Specifies the TCP/IP setting for the print server equipped with this printer.
IMPORTANT
After changing the settings for this item, cycle the power of the printer or perform a
hard reset to make the settings effective.
1
2
..........REJ IP 1 to 8
2
..........PER IP 1 to 8
2
..........REJ IP 1 to 8
2
..........PER IP 1 to 8
2
..........PER.MAC ADD.1 to 50
SETUP Menu Settings
6
6-27