Canon LBP3360 User Manual page 270

<52 RAST.MODE ERR>
Cause The printer received data in format that it does not support during printing in the
Raster mode.
Remedy 1 The printer continues printing by pressing the
data may not be printed properly.
Remedy 2 Print again using a printer driver that supports image data formats.
<53 SEC.PRINT ERR>
Cause Secured print data is sent from a printer driver that is not for LBP3360.
Remedy Press the
<53 STORE ERROR>
Cause The data for which a stored job print is specified is sent from a printer driver that
is not for LBP3360.
Remedy Press the
<58 JOB MEM.FULL>
Cause There is not sufficient free RAM space to process jobs.
Remedy 1 If you are processing multiple jobs at once, press the
printing, wait for other jobs complete, and then print again.
Remedy 2 If the job data is too large, divide the job and print again.
<59 JOB RX ERROR>
Cause The printer received any unanalyzable data while it is receiving a job, or it timed
out.
Remedy 1 Press the
Remedy 2 A problem may be occurring in the network you are using. Check the status of
the network that your are using.
(Online) key to cancel the job.
(Online) key to cancel the job.
(Online) key to cancel printing, then print again.
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
<Auto Error Skip>
<Auto Error Skip>
(Online) key to cancel
<Auto Error Skip>
Message List
8
8-33