Canon LBP3360 User Manual page 278

Cause 5 The hardware of the print server is in an abnormal condition.
Remedy Report the problems to your local authorized Canon dealer.
The printer stopped printing during a job.
Cause There is data remaining in the memory (the
Remedy Press the
in the RESET to output all the data remaining in the memory. (See "Canceling a
Job," on p. 3-6)
The indicators on the control panel do not come on.
Cause 1 The printer is not ON.
Remedy Turn the printer ON.
Cause 2 The printer is in Power Save Mode.
Remedy The printer will be ready to print after you send print data or press any key on
the control panel.
The keys on the control panel do not function.
Cause There is data remaining in the memory (the
Remedy Press the
in the RESET menu. (See "Canceling a Job," on p. 3-6)
A paper jam occurs each time you print.
Cause 1 The amount of the paper loaded in the paper cassette exceeds the load
limitation.
Remedy Reduce the amount of paper to within the load limitation and print again. (See
"Printing from the Paper Cassette," on p. 4-19)
IMPORTANT
The manual feed slot can be loaded with only one sheet of paper.
Cause 2 Paper is not loaded properly in the paper cassette or manual feed slot.
Remedy Load the paper properly and print again. (See "Printing from the Paper
Cassette," on p. 4-19, "Printing from the Manual Feed Slot," on p. 4-37)
Cause 3 Unusable paper is loaded in the paper cassette or manual feed slot.
Remedy Replace the paper with one that can be used and print again. (See "Paper
Requirements," on p. 4-2)
(Online) key to place the printer offline, then select FORM FEED
(Online) key to place the printer offline, then select FORM FEED
When You Cannot Obtain Appropriate Printout Results
(Job) indicator is on).
(Job) indicator is on).
8
8-41