Canon LBP3360 User Manual page 168

- Make sure that the size of the paper loaded in the manual feed slot matches the
paper size specified in the printer driver before printing. If they do not match, the
printer may stop printing, displaying the message <41 CHK PAPER SZE>, or a
paper jam may occur. Be sure to check if the paper size specified in the printer
driver matches the size of the paper loaded in the manual feed slot before using
the printer. However, if SPECIAL MODE J (See p. 6-31) is set to ON, the printer
prints without checking the paper size even when the paper size specified in the
printer driver and the size of the paper loaded in the manual feed slot do not
match.
- When printing from UFR II Printer Driver, you can load paper either in portrait or
landscape orientation. However, when printing custom size paper of its long
edges 215.9 mm or less, load the paper in landscape orientation. When you are
not using UFR II Printer Driver, load the paper in portrait orientation.
NOTE
Select CUSTOM SIZE or CUSTOM SIZER when you want to specify custom size
•
paper using application and print it. If a message that prompts you to change the
size of the paper appears during printing, press the
error before printing again.
You cannot print on any area within 10 mm of the edges of an envelope. (If you
•
have selected the [Print with Upper Left of Sheet as Starting Point] check box in
[Finishing Details] in UFR II Printer Driver, you can extend the printable area to
near the edges of the paper. For more details, see Help of UFR II Printer Driver.)
You can obtain the same result by specifying the setting for SLOT PAPER SIZE in
•
the SELECT FEEDER menu.
CASSETTE1 SIZE
A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZER, A5, B5
Specifies the size of the paper loaded in the paper cassette in the printer unit
(Cassette 1).
IMPORTANT
When you change the orientation of the custom size paper loaded in the paper
cassette frequently, it is convenient if CASSETTE1 SIZE is set to MIXED SIZES.
When CASSETTE1 SIZE is set to MIXED SIZES, you do not need to specify the
setting for CASSETTE1 SIZE each time you change the paper orientation.
However, observe the following when specifying MIXED SIZES.
- Make sure that the size of the paper loaded in the paper cassette matches the
paper size specified in the printer driver before printing. If they do not match, the
printer may stop printing, displaying the message <41 CHK PAPER SZE>, or a
paper jam may occur. Be sure to check if the paper size specified in the printer
driver matches the size of the paper loaded in the paper cassette before using the
printer. However, if SPECIAL MODE J (See p. 6-31) is set to ON, the printer prints
without checking the paper size even when the paper size specified in the printer
driver and the size of the paper loaded in the paper cassette do not match.
(Online) key to clear the
SETUP Menu Settings
6
6-13