Y Dimension; Append Cr To Lf - Canon LBP3360 User Manual

Y DIMENSION

127.0 to 355.6 mm; 355.6 mm*(5.00 to 14.00 inches; 14.00 inches*)
Enables you to specify the Y dimension of the custom paper. The Y dimension can
be adjusted between 127.0 mm (5.00") and 355.6 mm (14.00") in increments of
0.1 mm (0.01").
This function can be very useful when part of the printed image is cut off.
Increasing this dimension may allow some of the missing text to be correctly
printed. Make sure you do not increase the Y dimension beyond the actual size of
the paper you are using for printing.
NOTE
This item is displayed only when CUSTOM SIZE is set to SET.

APPEND CR TO LF

NO*, YES
Enables you to specify whether to append a carriage return (CR) when line feed
code (LF) is received.
If YES is selected, the print head moves to the beginning of the next line when line
feed code is received.
If NO is selected, the print head moves down to the next line when line feed code
is received, and the margin does not change (such as to the beginning of the next
line).
ABCDE
FGHIJ
Append CR to LF 'YES'
ABCDE ↓ FGHIJ
LF code ( ↓ ) only
ABCDE
Append CR to LF 'NO'
FGHIJ
SETUP Menu Settings
6
6-35