Canon LBP3360 User Manual page 281

Cause 2
Remedy
Cause 3
Remedy
The next page is printed from halfway across the previous page.
Cause
Remedy
Data is printed with its size reduced.
Cause
Remedy
8
Paper comes out wrinkled.
Cause 1
Remedy
Cause 2
Remedy
Paper curls.
Cause 1
Remedy
8-44 When You Cannot Obtain Appropriate Printout Results
"Top Margin" and "Paper Position" in the application are not specified properly.
Specify the settings for "Top Margin" and "Paper Position" in the application
properly, and then print again. (See the instruction manual supplied with your
application)
The printing position has been adjusted in ADJ.START POS. in the USER
MAIN. options in the SETUP menu.
Adjust the printing position to an appropriate value using ADJ.START POS. in
the USER MAIN. options in the SETUP menu. (See "Adjusting the Printing
Position," on p. 7-22)
"Line Spacing" or "Lines/Page" in the application is not specified properly.
Specify the settings for "Line Spacing" and "Lines/Page" in the application so
that data fits in one page, and print again. (See the instruction manual supplied
with your application)
The printer is set to reduce the print size.
Confirm the setting for [Manual Scaling] in the printer driver. (See Driver Guide)
Paper is loaded in the paper cassette or manual feed slot at an angle.
Load the paper in the paper cassette or manual feed slot straight. (See
"Loading Paper in the Paper Cassette," on p. 4-21, "Loading Paper in the
Manual Feed Slot," on p. 4-38)
Paper is damp since the paper has been stored in unsuitable condition.
Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 4-2)
Paper is damp since the paper has been stored in unsuitable condition.
Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 4-2)