Canon LBP3360 User Manual page 267

<1H CHK TNR CONN.>
Cause
Remedy 1 Remove the toner cartridge, then reinstall it properly.
Remedy 2 If <1H CHK TNR CONN.> appears and there is a problem with the print quality
<23 DOWN.MEM.FULL>
Cause
Remedy 1 The printer continues printing by pressing the
Remedy 2 Perform a soft reset using the RESET menu, increase the free space of RAM
<26 SYS.MEM.FULL>
Cause
8
Remedy 1 The printer continues printing by pressing the
Remedy 2 Perform a soft reset using the RESET menu, and then increase the free space
<27 JOB START ERR>
Cause
Remedy
8-30 Message List
There is a possibility that the toner cartridge is not installed properly.
even after applying the Remedy 1, remove the toner cartridge and replace it
with a new one. (See "Replacing the Toner Cartridge," on p. 7-2)
The memory for registering macro and custom characters has run out and
overflowed.
overflowed data cannot be registered.
using the following procedure, register the data again, and then print again.
Perform a hard reset or cycle the power of the printer (Be aware that all the
•
data in the memory will be deleted).
The work memory required for the printer process has run out while the system
is processing the data (mainly the graphics data and text data).
data with which an error has occurred is not printed properly.
of RAM using the following procedure.
Perform a hard reset or cycle the power of the printer (Be aware that all the
•
data in the memory will be deleted).
The specified emulation does not exist.
Press the (Online) key to continue printing from the next data. However, the
data with which an error has occurred is not printed.
(Warning Message)
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>