Canon LBP3360 User Manual page 268

<30 MEMORY FULL>
Cause The work memory has run out while the system is processing the data.
Remedy The printer continues printing by pressing the
data with which an error has occurred may not be printed properly.
<32 2-SIDED ERROR>
Cause The printer received 2-sided printing data of paper sizes (including the
orientation) or paper types unavailable for automatic 2-sided printing.
Remedy 1 The printer continues printing by pressing the
data on each side is printed on two pages.
Remedy 2 After performing a soft reset in the RESET menu, change the setting to a paper
size or type available for automatic 2-sided printing, and then print again.
<33 WORK MEM.FULL>
Cause The work memory for each operation mode cannot be secured.
Remedy 1 The printer continues printing by pressing the
data with which an error has occurred is not printed properly.
IMPORTANT
When you continue printing by pressing the
macro that is already registered may be deleted.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
the following procedure, and then print again.
Perform a hard reset or cycle the power of the printer (Be aware that all the
•
data in the memory that the printer has received will be deleted).
<35 TABLE FULL>
Cause The number of the documents in a job has exceeded 16.
Remedy The printer continues printing by pressing the
job with which an error has occurred is not printed.
<38 LOW IMGE QLTY>
Cause The printer cannot process the data because it is too complicated.
Remedy 1 The printer continues printing by pressing the
printer prints with the image quality level being lowered.
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
(Online) key. However, the
(Online) key, be aware that the data of
<Auto Error Skip>
(Online) key. However, the
<Auto Error Skip>
(Online) key. However, the
Message List
8
8-31