Changing The Language Used In The Display - Canon LBP3360 User Manual

Symptom
Nothing is printed
on the paper.
The (Message)
indicator is on and
a message is
displayed in the
display.

Changing the Language Used in the Display

The default value of the language used in the display is [ENGLISH].
You can change the display language to [FRENCH], [GERMAN], [ITALIAN], or
[SPANISH] using the following procedure.
1
Press the
SETUP
CONTROL MENU
2
Select CONTROL MENU using [
CONTROL MENU
POWER SAVE MODE→
3
Select PANEL LANGUAGE using [
[OK].
PANEL LANGUAGE →
=ENGLISH
Cause
Multiple sheets of paper were fed
at a time.
The toner cartridge was installed
with the sealing tape still
attached.
Some problem has occurred.
(Settings) key.
→
→
→
Turning the Printer ON and Checking the Printer Operation
Remedy
Align the paper stack in the paper
cassette properly and load it
again.
Take the toner cartridge out of the
printer, pull out the sealing tape,
and then reinstall the toner
cartridge.
See "Message List" (p. 8-27) and
solve the problem.
] and [ ], then press [OK].
] and [ ], then press
2
2-33