Canon LBP3360 User Manual page 225

4
5
6
7
7
8
7-26 Adjusting the Printing Position
Select ADJ.START POS. using [
ADJ.START POS. →
OFFSET Y(SLOT) →
The item for the printing position is displayed.
Select the paper source that you want to check the printing
position using [ ] and [ ], then press [OK].
OFFSET Y(CASS1)→
=0.0
Specify the target numeric value using [
press [OK].
Check the printout results of the Printing Position Adjustment Print and select the
numerical value to adjust the position.
Each time you press [
time you press [ ], the value decreases in - 0.1 mm increments. If you keep
holding down [ ] or [
-5.0
=-5.0
"=" is displayed on the left of the value, and the printing position is specified.
Press the (Online) key to place the printer online.
Press the (Utility) key.
UTILITY MENU
CONFIG.PAGE
] and [ ], then press [OK].
→
], the value increases in + 0.1 mm increments, and each
], the speed of the value changing is increased.
→
→
→
] and [ ], then