System Info; Extension; Push-To-Talk (Ptt) - Avaya 3616 Series User Manual

Avaya Inc.

System info

Phone IP address Displays the IP address currently assigned to the Wireless IP
Gateway IP address or
Server IP address
Firmware version Displays the software version running the Wireless IP

Extension

Push-to-talk (PTT)

Channel The current channel is displayed. The user may enable any PTT
Enable/Disable
Audio volume
Tone volume
(Additional options may be present. Contact your system administrator for information.)
21-300629, Issue 1, July 2005
Avaya 3616/3620/3626 Wireless IP Telephone User Guide
Telephone. This number may not be edited.
Displays the IP address currently assigned to the Avaya Voice
Priority Processor (AVPP) and OAI Gateway.
Telephone.
Displays the extension currently assigned to the Wireless IP
Telephone.
The 3626 Wireless IP Telephone incorporates push-to-talk
functionality. PTT may be allowed or disallowed by the
administrator. If allowed, the user may enable or disable locally,
and may set the channel, tone volume and audio volume. The
menu for push-to-talk does not appear if PTT is disallowed or if
no channel is enabled by the administrator.
channel that has been allowed by the administrator by entering
the corresponding number from the keypad. If PTT has been
enabled in this handset, the default channel is the lowest allowed
channel as set by the administrator.
Enable
turns on PTT mode.
is disabled by default.
If PTT is allowed by the administrator and enabled by the user,
standby Battery Pack life is decreased to about 30 hours.
Used to adjust volume of PTT audio and tones. The graduated
volume bar indicates the levels. The audio volume setting may
be overridden by adjusting volume while the handset is in a
push-to-talk call. Select a volume level by pressing the
Down
side buttons and then pressing the
Disable
turns off PTT mode. PTT
OK
softkey.
Up
and
Page 17