Appendix C: System Parameters Customization - Avaya VPNremote 4600 Series Administrator's Manual

Appendix C: System Parameters Customization

For additional definitions and information on how to change IP telephone parameters, see the
Avaya 4600 Series IP Telephone, Release 2.3, LAN Administrator Guide, Server Administration
chapter, Administering Options for the 4600 Series IP Telephones.
The parameters in
information on the Script File, see the Avaya 4600 Series IP Telephone, Release 2.3, LAN
Administrator Guide, Server Administration chapter, Contents of the Upgrade Script section. We
recommend that you administer options on the 4600 Series IP Telephones using script files.
Table 4: VPNremote for 4600 Series IP Telephones Customizable System
Parameters
Parameter Name
NVVPNMODE
NVVPNAUTTYPE
Table 4 are configurable to desired values in the Script File. For additional
Default Value
0
2
Description and Value Range
Controls when VPN Mode is started. Valid
value is one ASCII numeric digit, 0 to 3.
Values are:
0 = VPN is disabled.
1 = VPN will start after address assignment
and before downloading script.
2 = VPN will start after downloading of script.
3 = VPN will start on user request.
Controls user authentication mode. Valid
value is one ASCII numeric digit, 1 and 2.
Values are:
1 = CHAP
2 = PAP
The method chosen is dependent on the
type of authentication used by the security
gateway.
Issue 1 December 2005
1 of 4
25