Overview; Status Indicators - Avaya 3616 Series User Manual

Avaya Inc.

Overview

Status Indicators

1 ▪ ▪ ▪ ▪ ▪ ▪ ▪ The line indicators are associated with line access keys. In the
Battery Low This message displays and an alarm sounds when the Wireless IP
[No Service message] If warning tones are not disabled, an alarm will sound and a
[Melody] A melody is played after the Wireless IP Telephone is powered
21-300629, Issue 1, July 2005
Avaya 3616/3620/3626 Wireless IP Telephone User Guide
Your Wireless IP Telephone is a state of the art communication
device that utilizes radio wave technology to send and receive
voice transmissions. It is designed to operate like the familiar cell
phone. However, the Wireless IP Telephone utilizes the private
telephone system installed in your facility and will not operate
outside the area reached by this system. Additionally, the features
that are available depend on how the Wireless IP Telephone has
been programmed by your system administrator.
The following guide is meant to provide general information
about your Wireless IP Telephone. Contact your system
administrator for additional information on how your Wireless IP
Telephone functions within your telephone system.
preceding diagram, line 1 is active.
◄ ► A left or right arrow is displayed when the screen can be toggled
either left or right to display more characters as described above.
▲ ▼ Up and down arrows are displayed when the menu has additional
options above or below what is shown in the display area.
The battery icon indicates the amount of charge remaining in the
Battery Pack. The level indications are approximations of the
remaining Battery Pack life. They do not indicate equal amounts
of Battery Pack Life. When only one level remains, the Battery
Pack needs to be charged.
The voicemail icon is activated when a new voice mail message
is received if the feature is supported by the phone emulation. It
appears to the right of the Signal Strength icon.
Telephone is in standby mode and the Battery Pack is critically
low. The Wireless IP Telephone cannot be used until the Battery
Pack is charged.
descriptive message displays when the handset cannot receive or
place calls. You may be outside of the covered area. Walk back
into the covered area. The in-service tone indicates service is re-
established.
The signal strength icon indicates the strength of the signal and
can assist the user in determining if the Wireless IP Telephone is
moving out of range.
The download icon indicates that the Wireless IP Telephone is
downloading code. This icon only appears while the Wireless IP
Telephone is running the over-the-air downloader. It appears to
the right of the Signal Strength icon in the same location as the
Voicemail icon.
on for the first time following a completed charge (Charge
Complete).
Page 7