Avaya 3616 Series User Manual page 25

Avaya Inc. Avaya 3616/3620/3626 Wireless IP Telephone User Guide
Blinking LED If the LED starts blinking as soon as the Battery Pack is
inserted, the Battery Pack may be improperly seated. Lift it out
and reinsert. If the LED continues to blink or starts blinking at
any time during the charging process, it indicates that there is a
problem with the Battery Pack that makes it unusable. Do not
continue to charge the Battery Pack. Dispose of it properly and
do not attempt to use it in the Wireless IP Telephone. Do not
attempt to open or repair a defective Battery Pack. Contact your
service representative for assistance.
To replace the Battery Pack into the i640 Wireless IP
Telephone, slide the Battery Pack straight into the cavity until it
snaps into place. You should not have to force it against the
Wireless IP Telephone.
To place the Battery Pack into the 3620 Wireless IP Telephone,
slide the lip of the Battery Pack into the bottom of the cavity.
Push the top of the Battery Pack until it snaps into place. You
should not have to force it against the Wireless IP Telephone.
21-300629, Issue 1, July 2005 Page 25