Quad Chargers - Avaya 3616 Series User Manual

Avaya Inc.

Quad Chargers

Quad Charger
Model GCN100
(shown with four empty charging bays)
Overview The Quad Charger is designed to simultaneously charge four
Power supply Set up the Quad Charger by first obtaining the appropriate
Removing and replacing
a Battery Pack
21-300629, Issue 1, July 2005
Avaya 3616/3620/3626 Wireless IP Telephone User Guide
Nickel Metal Hydride (NiMH) Battery Packs. Model GCX100
is designed to charge the BPX100 Battery Pack for the 3626
Wireless IP Telephone. Model GCN100 is designed to charge
the BPN100 Battery Pack in the 3620 Wireless IP Telephone.
Full charging is accomplished in approximately one and a half
hours.
Avaya electrical supply for the country or region. Place the
Quad Charger on a flat, horizontal surface and plug the power
supply into the Quad Charger and into an appropriate wall
outlet.
To remove the Battery Pack from the 3626 Wireless IP
Telephone, hold handset in one hand with the keypad facing up.
Press both battery release buttons on the left and right sides of
the handset at the same time. The Battery Pack will release
downward. You may catch it with the palm of your other hand.
If the Battery Pack does not release, gently shake the handset
while pressing both release buttons. Do not pry.
Remove the Battery Pack from the 3620 Wireless IP Telephone
by pressing down on the latch on the Battery Pack on the back
of the Wireless IP Telephone. The Battery Pack releases
outward.
Insert the Battery Pack into one of the four charging bays so
that the Battery Pack contacts meet the charging bay contacts.
The LED above the charging bay will turn on to indicate that
charging is in progress. Complete charging occurs in one and a
half to two hours.
When charging is complete, the LED will turn off. Lift the
Battery Pack out of the charging bay.
Quad Charger
Model GCX100
(shown with two empty charging bays)
Page 24