Basic Operation; Getting Started - Avaya 3616 Series User Manual

Avaya Inc.

Basic Operation

Getting Started

Turn the Wireless IP
Telephone on
Turn the Wireless IP
Telephone off
Make a call Press the
Select a line If multiple lines are available, press
Dial a number Dial calls with the Wireless IP Telephone exactly as with your
Answer a call The Wireless IP Telephone will ring or vibrate to alert you to an
Headset answer When a headset is plugged into the Wireless IP Telephone, the
Hang up To hang up, press the
Unlock Keypad Press the
Lock Keypad Press
Change speaker volume You may increase or decrease the volume of the speaker while in
21-300629, Issue 1, July 2005
Avaya 3616/3620/3626 Wireless IP Telephone User Guide
Power On
Press and hold the
chirps sound. Release the key. The in-service tone sounds and the
extension number displays. The Wireless IP Telephone is now in
standby mode, ready to make and receive calls.
While in standby mode, press and hold the
chirp sounds and the Wireless IP Telephone turns off. The
Wireless IP Telephone cannot be directly turned off during a call.
End the call first and then turn the Wireless IP Telephone off.
Start Call
key and then dial the number.
LINE
press and the number key corresponding to the desired line.
desk phone. You may dial extension numbers, internal numbers,
or make external calls, depending on the setup of your PBX.
After you hear a dial tone, press the number keys to dial the
number.
You may also predial a number (cell phone dialing). Press the
number keys and then press
incoming call. Additionally, a line number on the display may
flash, and the display may show information about the call, such
as caller's name and extension.
To answer a call, press the
your ear and speak with a normal tone of voice.
If you are on a call and hear subdued ringing, a call is coming in
on a second line. The line number on the display may be flashing.
To answer this call, put your first call on hold and press the
key, then press the line number of the second call.
Start Call 0 – 9, * #
, or key may be pressed to answer a call.
End Call
of each call.
Unlk
softkey, then
FCN Select
, then , to activate
menu.
a call by pressing the corresponding
located on the left side of the Wireless IP Telephone.
key for about one second, until two
Power Off
Start Call
to go off hook,
Start Call
to begin the call.
Start Call
key, hold the earpiece to
key. Be sure to do this at the end
#
, to unlock the keypad.
Lock Keys
on the Standby
Up Down
and
key. One
LINE
buttons
Page 9