More Remote Options - Zektor HDMI5 User Manual

Front panel LED sequencing while learning
1 2
The IR LED will flash...
POWER
1 2 3
...and the LEDs will sequence each time a
4 5 6
remote control button is pressed if the IR
7 8 9
code is compatible with the HDMI5.
0
+ +
_ _
VOL CH
Skipping or Deleting IR codes
1 2
POWER
1 2 3
4 5 6
7 8 9
0
+ +
_ _
VOL CH
10 HDMI5 Component Video Switch
3 4 5 SEL
3 4 5 SEL
Disable current IR code
Skip current code
(Leave IR unchanged)

More Remote Options

Front panel LED sequencing while learning
Dur ing the lear ning process, as each button of the remote is
A1 A2
pressed, the front panel LEDs will sequence. At any given time, the
LED that is slowly flashing, indicates the func tion the HDMI5 is cur-
rently waiting to lear n. The sequence is:
Standby LED
'1' - Red LED
'2' - Red LED
'3' - Red LED
'4' - Red LED
'5' - Red LED
'SEL' Red LED
'A1' LED
'A2' LED
I f the LEDs do not sequence, and the IR LED does not flash, when a
button is pressed on the remote, then the HDMI5 does not recognize
the IR code being sent. M ake sure the remote's batter ies are fresh.
The HDMI5 will wor k with most remotes, however there are a few
exceptions. S ome technical reasons for not wor k ing with some re -
motes are: The remote may be using a car r ier frequenc y outside the
A1 A2
range of the HDMI5 (KH z to 2KH z), or it may be using one of the
few protocols the HDMI5 does not understand, like the Philip's RC5
and RC6 protocols.
I f the HDMI5 does not lear n the remote codes you are using, you
will have to use another remote, or in the case of using a universal
remote, you'll have to pick a different manufac turer's code.
Skipping or Deleting IR codes
Dur ing the IR lear ning process you can choose to delete the cur rent
code (disable IR for that func tion) or sk ip the cur rent code (leave it
unchanged) by pressing the 'A1' or 'A2 buttons:
'A1' Disable IR for cur rent func tion.
'A2' Sk ip cur rent code, leave it unchanged.
Waiting for Power Toggle IR code.
Waiting for the '1' IR code.
Waiting for the '2' IR code.
Waiting for the '' IR code.
Waiting for the '' IR code.
Waiting for the '5' IR code.
Waiting for 'SEL' IR code.
Waiting for 'A1' IR code.
Waiting for 'A2' IR code.
HDMI5 Component Video Switch 11