Resetting To Factory Defaults - Zektor HDMI5 User Manual

Step 1: Reset All Parameters to Factory Defaults
1 2
1
Start by pressing and
holding the Power
button...
3
 HDMI5 Component Video Switch
3 4 5 SEL
2
...while continuing to hold the Power
button, press and hold both the '2'
and the '' buttons.
After about  seconds, the display will flash
indicating all parameters have been restored
to their factory programmed values.

Resetting to Factory Defaults

I f, for whatever reason, you'd like to reset your HDMI5 back to its
fac tor y default condition, this is easily done...
A1 A2
Step 1: Reset All Parameters to Factory Defaults
1. First press and hold the Power button
2. While continuing to hold the Power Button, press and hold
both the '2' and '' buttons.
3. Af ter holding all buttons for about  seconds, the display
will flash indicating all parameters have been restored to
their fac tor y programmed values.
Note: Resetting the HDMI5 to its default value, resets ever y-
thing to the same state it was when it lef t the fac tor y!
This includes any learned IR codes, all timing informa-
tion, c able length tuning, etc.
Please be aware of this before issuing this command!
HDMI5 Component Video Switch 5