Default Bypass Paper Type Setting] - Oce VarioLink 2222c User Manual

7.1 [System Settings]
7.1.15

[Default Bypass Paper Type Setting]

Configure the initial settings for the paper type to be used for the bypass tray. The initial setting for the paper
type is applied after the job finishes or the tray runs out of paper.
%
Press Utility/Counterö[Administrator Settings]ö[System Settings]ö[Default Bypass Paper Type Set-
ting].
Settings
Configure whether to specify the initial setting for paper type for the bypass tray. When you specified this,
select a paper type.
Factory default
[Default Bypass Paper
Type Setting]
VL3622c/VL2822c/VL2222c
[Yes]
[Paper Type]: [Plain Paper]
7
7-23