Oce VarioLink 2222c User Manual page 147

6.9 [Register Authentication Information]
3
Register authentication information.
For biometric authentication, place your finger on the authentication unit to scan the finger vein pattern.
% Scan the finger vein pattern three times; reset the same finger and then press [Scan] for each scan-
ning.
% After scanning the finger vein patterns, place the same finger, and press [Authentication Test].
% If your finger vein patterns have been authenticated in the authentication test, press [New]. If au-
thentication has failed, retry scanning the finger.
For IC card authentication, place your IC card on the authentication unit, and press [OK].
4
Press [Close].
5
Press [OK].
VL3622c/VL2822c/VL2222c
6
6-17